Mon–Sat 7AM–6PM  ·  (612) 516-0263

Burnsville & the Twin Cities West Metro

Butkov Remodeling

Basement Finishing in Deephaven

The city takes your wastewater away. The water coming in is entirely your own problem.
Finished basement family room with recessed lighting

Deephaven is unusual, and most homeowners here know half of it. The entire city is classified as a sewered area and no structure may be occupied without a municipal sewer connection, so there is no septic system to size and no drainfield to worry about.

The other half catches people out. Deephaven has no municipal water system. Apart from a few localised areas, every house in the city draws from a private well, and the city’s own comprehensive plan notes that well water here runs high in iron and in some cases carries elevated arsenic.

If your lower level includes a bathroom, a wet bar or a laundry, the well and whatever treatment sits beside it are what determine whether that works properly. That is where we start.

What basement finishing in Deephaven has to account for

A lower-level bathroom adds fixtures to a supply system that was sized for the house as it was. On municipal water that is rarely worth a conversation. On a private well it is.

Three things get checked before we specify a single fixture. The well’s yield and the pressure tank’s capacity, because a rain head and a body spray downstairs will find the limit of both. The treatment train — softening and iron filtration in particular, since high iron is what stains a new white fixture orange within a year and quietly ruins valve cartridges. And the physical space all of that occupies, because in a Deephaven house the mechanical room is not a furnace and a water heater. It is a pressure tank, a softener, usually iron treatment, and the plumbing manifold for the whole house.

That equipment is the reason lower-level floor plans here need drawing around reality rather than around a blank rectangle. It cannot be boxed in without access, it cannot be relocated casually, and it needs a floor drain. We map it first and design the room around what is actually there.

If you have not had the water tested recently, do that before choosing fixtures rather than after. It costs very little, it tells you whether treatment needs upgrading as part of the project — which is far cheaper while a plumber is already on site — and it settles what finishes will actually survive.

Licensed • Bonded • Insured • Serving the Twin Cities

Butkov Remodeling — Your Home Deserves Better Than Average

Nearly every Deephaven house runs on its own well, and that is what decides whether a lower-level bathroom actually performs. We look at the water before the layout.

Get in Touch with Our Team

Basement finishing throughout Deephaven

Deephaven, MN
Stone arch landmark among trees in Deephaven, Minnesota
We finish lower levels throughout Deephaven, in Cottagewood, Northome, Heathcote, around Chowen's Corner and Park Place, and on properties fronting Carson's Bay, Robinson's Bay, St. Louis Bay and South Lower Lake. The corridors are Minnetonka Boulevard, Highway 7, County Road 101, Vine Hill Road, Deephaven Boulevard and Northome Parkway. Lots here are large by metro standards and the housing runs from converted summer homes through mid-century construction to newer estates, so what is under the house varies considerably from street to street. Deephaven also sits across two watershed districts, and which one has jurisdiction over your parcel has to be established rather than assumed.

Common Questions

Can we add a bathroom to the lower level?+
Usually yes, and there is one genuine advantage to being in Deephaven: the whole city is on municipal sanitary sewer, so unlike much of the west metro there is no septic capacity question and no compliance inspection standing between you and a lower-level bath. The constraint is on the supply side instead. We look at your well's yield, the pressure tank, and the treatment equipment before specifying fixtures, because that is what determines whether the shower you want will actually perform.
Our water stains everything orange. Will that ruin a new bathroom?+
It will discolour fixtures and surfaces and it shortens the life of valve cartridges, and Deephaven's own comprehensive plan identifies high iron as a characteristic of private well water in the city. The good news is that it is a solvable problem and the cheapest moment to solve it is while a plumber is already working in your mechanical room. We will tell you honestly whether your existing treatment is adequate for the fixtures you are adding or whether it needs upgrading as part of the project.
Should we test the water before starting?+
Yes, and before choosing fixtures rather than after. It is inexpensive and it answers several questions at once: whether treatment needs work, what finishes will survive, and whether there is anything present that should be addressed for reasons beyond the remodel. The city's plan notes that some Deephaven wells have carried elevated arsenic, which is a health matter rather than a plumbing one and worth knowing about independently of any building project. Testing settles it either way.
The mechanical room is full of equipment. Does that limit the layout?+
It shapes it, and pretending otherwise is how people end up with a beautiful room and a water softener they cannot reach. A Deephaven mechanical space typically holds a pressure tank, a softener, iron treatment and the house manifold in addition to the furnace and water heater, and all of it needs service access, clearances and a floor drain. We measure and map the whole assembly before drawing the floor plan, and we design the partition so the equipment stays serviceable rather than sealed behind finished wall.
What about an egress window and hardcover?+
Deephaven caps hardcover at 25 percent of the lot across its residential districts, with relief available only by conditional use permit. An egress window well and any associated surfacing counts toward that total alongside the house, drive, patios and paths, and there is a separate prohibition on hardcover within 50 feet of the ordinary high water mark. On a lakeside lot that determines which wall the window goes in. The window itself needs a net clear opening of at least 5.7 square feet, a minimum width of 20 inches, a sill no higher than 44 inches, and a well of at least 9 square feet.
Which watershed district do we need a permit from?+
That depends on your parcel, and it is worth checking rather than assuming. Deephaven is split between the Minnehaha Creek Watershed District and the Riley-Purgatory-Bluff Creek Watershed District, and the city requires evidence of the proper permit from whichever holds jurisdiction before a building permit issues. For an interior basement finish the thresholds are generally not reached, but an egress excavation or any significant grading can engage them. We establish which district applies at the start of permitting.

Tell us what you want down there and when you last had the water tested. On a Deephaven house those two answers together settle more of the budget than the square footage does.

You get a written scope and a fixed price before demolition starts. Licensed, bonded and insured in Minnesota, #BC800584. Two-year workmanship warranty on basement projects against improper installation.

Start with the well, not the floor plan

Serving the Twin Cities
Serving the Twin Cities

Free Remodeling Estimate